home
home homehome
Phone: 1.800.872.1608 info@worthingtonmillwork.com

Worthington Columns – Installation Instructions

Worthington provides complete installation instructions with every order. Please call us for an advanced faxed copy. All balusters should be installed with urethane adhesive, please do not forget to order it. We recommend a 10oz tube for every section of top and bottom rail.

 

IMPORTANT

Be certain the load is evenly distributed over the bearing surface of the shaft.

If building code requires uplift protection, contact us for recommendations.

To preserve and protect the column outdoors, it is necessary to paint with one coat of high quality exterior primer followed by two coats of an exterior paint.

2nd floor balconies should NOT be attached directly to the side of any fiberglass column. Please contact us for recommendations.

Water should not be allowed to collect inside fiberglass columns. Flashing may be required to channel water away from the inside of the column. A drainage hole can be drilled in the bottom of the shaft and plinth if necessary.

Products

Arches
Architectural Columns
Balustrade System
Brackets
Capitals
Entrance Systems
Keystones
Louvers
Medallions
Mouldings
Pergolas
Porch Railing
Shutters
Wall Niches
Window Panels
Window Heads